Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: Hobby King -Turborix 2.4g 6 channel- the same?  (Read 3784 times)

mogogear

  • Guest
Hobby King -Turborix 2.4g 6 channel- the same?
« on: September 23, 2009, 06:34:34 pm »

As I can't seem to find this bargain 6 channel radio except under this brand...Is it the same?

 I now find it compelling to get a radio that I can use for various boats without changing radios all the time and I don't feel like buying new receivers to over come compatibility.I was pointed by a club member to go for the 6 channel Spektrum ... but this HK sure seems a better priced deal.

 I can afford either one...is there a ease of use detail I have missed in all my reading here?

I do understand the Turborix / HK radio has to be programmed on a computer... so I assume the Spektrum does too?

After the programming... If I am out with two boats, can the boat I am sailing just be selected on the radio  in order to use the radio with one of my programmed receivers?

Thanks and sorry if this has been covered to death

Logged

barryfoote

  • Guest
Re: Hobby King -Turborix 2.4g 6 channel- the same?
« Reply #1 on: September 23, 2009, 06:42:33 pm »

It has had plenty of coverage, but the bottom line is go for the Turborix. It works well and offers brilliant value for money. I know of several people around the world who are very satisfied with it.

Barry
Logged

mogogear

  • Guest
Re: Hobby King -Turborix 2.4g 6 channel- the same?
« Reply #2 on: September 23, 2009, 06:51:51 pm »

Thanks barry

So -yes go for the HobbyKing version of the Turborix?...just being careful
Logged

andygh

  • Guest
Re: Hobby King -Turborix 2.4g 6 channel- the same?
« Reply #3 on: September 23, 2009, 08:35:55 pm »

No, you can't select different model setups without plugging into your PC  :((, just make sure esc and rudder work the same way round on both models.

The Eurgle 9 channel radio on the other hand..................
Logged

Peter Fitness

  • Global Moderator
  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 7,391
  • Location: Wyrallah, near Lismore NSW Australia
Re: Hobby King -Turborix 2.4g 6 channel- the same?
« Reply #4 on: March 14, 2010, 10:14:53 pm »

My mate and I ordered 2 of the Hobby King 6 channel 2.4 Ghz radios from Hobby City, together with the PC cords and 2 extra receivers each. I downloaded the required drivers and set up software, but found that, apart from increasing the servo travel, I did not need to make any other adjustments. A radio with 3 receivers and the PC cord for under $100 Australian is an absolute bargain, and this price includes postage costs. I also ordered another receiver for a club member who has a Turborix 6 channel radio, as the receivers are interchangeable between Turborix, Hobby King and FlySky (who actually make the radios, I believe).

I have used mine and it performed flawlessly, it feels good, the sticks are well balanced, and the range is excellent. I have added a connection to mine to enable me to use a rechargeable battery pack instead of dry cells. I found a tutorial on how to do it here  http://kenbuys.com/turnigy-transmitter-batteries-1450mah/

Based on my experience, I would recommend these units to anyone looking for a cheap, well made radio.

Plenty of info on the radios, and other Hobby King products here   http://www.hobbyking.com/hobbyking/forum/default.asp

Peter.
Logged
Pages: [1]   Go Up
 

Page created in 0.095 seconds with 23 queries.