Topic: Battleship Bismarck - 1:100 (Read 116455 times)

Tomasz. · « **Reply #325 on:** April 17, 2023, 05:50:19 pm »

work on catapults

Tomasz. · « **Reply #326 on:** April 29, 2023, 07:07:36 pm »

painted with primer paint

littoralcombat · « **Reply #327 on:** April 30, 2023, 12:33:16 am »

Quote from: Tworrs on April 03, 2023, 09:23:53 pm

Very, very impressive Tomasz, the detail is at a whole new level.
I really enjoy looking at your work, it demonstrates what is possible.

I couldn't agree more.
Tomasz, your work is truly inspirational, thanks for sharing your progress.
Nigel

Tworrs · « **Reply #328 on:** May 01, 2023, 10:36:50 am »

Tomasz, thank you for sharing your progress once again, it is really appreciated.
Garry

Tomasz. · « **Reply #329 on:** May 04, 2023, 06:15:13 pm »

Another cutter, Motorbarkasse 9.2m, is being built.

Tomasz. · « **Reply #330 on:** June 07, 2023, 02:22:22 pm »

rowing boats

Tomasz. · « **Reply #331 on:** June 07, 2023, 02:23:18 pm »

next photos

Tomasz. · « **Reply #332 on:** June 09, 2023, 05:05:25 pm »

last piece of the aft superstructure completed

Dreadnought · « **Reply #333 on:** June 10, 2023, 01:23:13 pm »

Looks Good!

raflaunches · « **Reply #334 on:** June 10, 2023, 09:31:14 pm »

Proper job, got to be the best model of Bismarck out there

Beagle1831 · « **Reply #335 on:** June 10, 2023, 10:28:13 pm »

I agree with Nick!

Superb model - amazing.

Tomasz. · « **Reply #336 on:** June 14, 2023, 06:11:16 pm »

superstructure completed

Beagle1831 · « **Reply #337 on:** June 14, 2023, 06:21:19 pm »

Brilliant!

Geoff · « **Reply #338 on:** June 15, 2023, 03:25:28 pm »

As always superb workmanship. One way to make oars is to use styrene rod and simply squeeze flat in a smooth jaw vice. Too much and it looks like a paddle but its easy to do and very quick and takes about 3 seconds to make an oar.

In theory this should work with aluminium or even copper assuming you can get enough pressure.

Cheers

Geoff

Tomasz. · « **Reply #339 on:** June 15, 2023, 04:54:03 pm »

Quote from: Geoff on June 15, 2023, 03:25:28 pm

As always superb workmanship. One way to make oars is to use styrene rod and simply squeeze flat in a smooth jaw vice. Too much and it looks like a paddle but its easy to do and very quick and takes about 3 seconds to make an oar.

certainly dozens of paddles made with this technique will not come out identical

Colin Bishop · « **Reply #340 on:** June 15, 2023, 06:07:29 pm »

I have had success with taking a light hammer to brass wire to make miniature oars and trimming each end to make them equal.

Colin

Tomasz. · « **Reply #341 on:** June 21, 2023, 05:38:18 pm »

hangars, motor boats, lifeboats and funnel in common photos

cos918 · « **Reply #342 on:** June 21, 2023, 05:40:19 pm »

Look fantastic. I have never seen so much detail .
John

Geoff · « **Reply #343 on:** June 22, 2023, 12:31:19 pm »

As always superb workmanship. One way to make oars is to use styrene rod and simply squeeze flat in a smooth jaw vice. Too much and it looks like a paddle but its easy to do and very quick and takes about 3 seconds to make an oar.

certainly dozens of paddles made with this technique will not come out identical
[/size]
[/size]
[/size]In fact they do, its only a question of noting how far you push the vice lever, the rod material is entirely consistent so the "squash" factor being the same produces identical oars. Not tried it with metal but the process should be the same.

[/size]Cheers

[/size]Geoff

Tomasz. · « **Reply #344 on:** July 07, 2023, 11:14:12 am »

Both superstructures assembled for photo although not yet glued.

ballastanksian · « **Reply #345 on:** December 03, 2023, 11:48:23 pm »

That bridge would win awards in any modelling show anywhere on its own Tomasz!

Amazing work.

littoralcombat · « **Reply #346 on:** December 11, 2023, 07:44:07 pm »

Tomasz, your work is truly inspirational.
Thanks for continuing to share your progress, I always look forward to your updates.
Nigel

News:

Author Topic: Battleship Bismarck - 1:100 (Read 116455 times)