Topic: its my "NERTHUS" new fishing trawler... (Read 7326 times)

rathikrishna · « **on:** December 13, 2011, 02:01:57 pm »

Good Evening all of my Friends and Colleagues..Wish you all Merry Christmas and Happy New Year....this is my new fishing trawler, and i consider it as the Model of Christmas, who brings happiness and prosperity to all...all of the efforts that i took to make this model, is dedicated to all of my Friends and Colleagues, to be graced in this Christmas and New year month..God bless us all...I am thanking you all, for suggesting the name for this craft, and a million thanks for my doubts about some device used in this craft...

as usual, i started with thermocol..she spans in to 2.5 feet, and 8 inches beam extreme. she is fully equipped, even with an MP3 player.

rathikrishna · « **Reply #1 on:** December 13, 2011, 02:06:51 pm »

i fixed a RS 380 motor at first but it proved disastrous..so i rewound it in to 7.2 volts specs, and keeping a tip in mind, that, torque instead of RPM, so doing well..and this motor is heavily brushed, for long time operations..it drops only about 170 mAmps, so with a simple 2200 mA/H Li Poly battery, she runs for hours..

can see the cooling tubes over motor, is a simple solution for long time run..this tube is taken from, deep freezer tubing..

rathikrishna · « **Reply #2 on:** December 13, 2011, 02:09:49 pm »

prop is made out of an aluminum vessel lid, and added a scoop for cooling water inlet...
started super structure..all paper..and base..foam board..

rathikrishna · « **Reply #3 on:** December 13, 2011, 02:11:55 pm »

follows..sorry for the repeated postings..due to my basic connection..apologize...

rathikrishna · « **Reply #4 on:** December 13, 2011, 02:14:30 pm »

i finished this craft after taking a lots of research...and added some innovations from all over the world, while accepting some traditional formulas...
added the deep freezer pit..

ladder is from paper..

rathikrishna · « **Reply #5 on:** December 13, 2011, 02:17:23 pm »

the horn is made from a little plated bell, intended to decorate the Christmas tree...

the whole winches are made of papers...

rathikrishna · « **Reply #6 on:** December 13, 2011, 02:18:20 pm »

follows..

rathikrishna · « **Reply #7 on:** December 13, 2011, 02:19:37 pm »

life rafts were made out of pvc pipe and paper..in scale..

rathikrishna · « **Reply #8 on:** December 13, 2011, 02:21:06 pm »

adding the poles...i am happy that i got some good and clear explanations from my Friends..about this device...

rathikrishna · « **Reply #9 on:** December 13, 2011, 02:22:56 pm »

adding the heavy winch..

rathikrishna · « **Reply #10 on:** December 13, 2011, 02:24:46 pm »

when not in need can collapse the poles...
and detailing the bow winch..

rathikrishna · « **Reply #11 on:** December 13, 2011, 02:25:39 pm »

bow winch in detail...

rathikrishna · « **Reply #12 on:** December 13, 2011, 02:27:09 pm »

anchor is again made out of brass rod and paper..seasoned for water proofing...

rathikrishna · « **Reply #13 on:** December 13, 2011, 02:29:33 pm »

time to paint...
i used all enamel paint, is inexpensive...added some clay powder to achieve the matte texture...

rathikrishna · « **Reply #14 on:** December 13, 2011, 02:31:06 pm »

the winches painted in signal red, and bright blue, as i noticed it from a real craft...

rathikrishna · « **Reply #15 on:** December 13, 2011, 02:32:01 pm »

painting in progress..

rathikrishna · « **Reply #16 on:** December 13, 2011, 02:33:57 pm »

i accidentally found two Diesel barrels on a real craft, and i added those also..it was huge one...
both drums were made from paper rolls...and detailed..seasoned..

rathikrishna · « **Reply #17 on:** December 13, 2011, 02:34:53 pm »

finished winches...

rathikrishna · « **Reply #18 on:** December 13, 2011, 02:36:08 pm »

she is completed..and waiting for a thorough dry...

rathikrishna · « **Reply #19 on:** December 13, 2011, 02:37:25 pm »

the stand was made out of ply wood and hand painted with earth and black to depict the hard wood...

rathikrishna · « **Reply #20 on:** December 13, 2011, 02:38:53 pm »

Diesel barrels in close up...and the fishing nets..

rathikrishna · « **Reply #21 on:** December 13, 2011, 02:40:39 pm »

ready for the run...
and time to bonvoyage...maiden...

rathikrishna · « **Reply #22 on:** December 13, 2011, 02:41:48 pm »

some nice photographs...

rathikrishna · « **Reply #23 on:** December 13, 2011, 02:42:57 pm »

follows...
and pole in detail...

rathikrishna · « **Reply #24 on:** December 13, 2011, 02:44:38 pm »

i got my Colleagues in my home, after some hard modeling projects, so i got some good formation videos..

News:

Author Topic: its my "NERTHUS" new fishing trawler... (Read 7326 times)

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna

rathikrishna