Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length.

[returnee]

Can anyone suggest the correct size tube (external dia.) of a working bow thruster to fit in a speedline 1/16 severn. the tube supplied @22mm seems small, your thoughts please.
Thanks
Gerard

[stuarts2]

Hi the tube that come with my kit was at 22mm and was correct, got my thruster from Deans Marine works fine, how you getting on with the build?

[returnee]

Hi Stuart,
Not started yet, just trying to get all the bits and pieces together before starting.
Will go with the 22mm.
Gerard

[Mungeltuete]

Hi Gerard,

I have installed a 22mm brass bow thruster --> http://www.hobby-lobby-modellbau.com/onlineshop/product_info.php/info/p3912_Bow-Thruster-20-mm---Brass-Tube---1-Prop----5101-11.html

Here also some pictures of the installed bow thruster:





I hope that helps.

Cheers,
Markus

[returnee]

Hi Markus,
Thanks for the info, it looks a very substantial unit, and pricey.
It certainly looks the bees knees.
Gerard

[nhp651]

Hi Markus......lovely looking product ......what voltage does the bow thruster work off. thanks.
neil.

[derekwarner]

Hullo Markus.......the sectional image of the 5101-11 bow thruster does not show, but are the two 20 diameter tubes sealed to the central drive hub with an o-ring on each side? .........Derek

http://www.hobby-lobby-modellbau.com/onlineshop/product_info.php/info/p3912_Bow-Thruster-20-mm---Brass-Tube---1-Prop----5101-11.html

[Mungeltuete]

Hello Folks,

@Neil:
The bow thruster comes without motor. So the voltage depends on the motor you connect. The bow thruster has a 3mm shaft and you can connect any motor you want.

@Derek:
There is no o-ring between the tubes. Better you use some sealing paste or solder the pieces together.


Cheers,
Markus

[nhp651]

thanks Markus..that makes it even better of a purchase.
thanks.
neil.